Sharp MX-4100N Operation Manual page 140

(1)
2-Sided Copy
3
The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
Color Mode
Full Color
Exposure
Auto
4
Copy Ratio
Original
100%
Auto
8½x11
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
5
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOR START] key or the [BLACK & WHITE START] key.
6
Scanning begins.
Remove the original and place the next original, and then press the [COLOR
START] key or the [BLACK & WHITE START] key.
7
Repeat this step until all originals have been scanned.
For the second original and following originals, use the same [START] key as you did for the first original.
(2)
OK
Binding
Change
Special Modes
2-Sided Copy
Plain
8½x11
Output
1. 8½x11
8½x11R
2.
File
8½x14
3.
4. 11x17
Quick File
Paper Select
Auto
8½x11
Preview
Plain
7
Special Modes
2-Sided Copy
Plain
8½ 11
) and then enter the correct number.
Select the 2-sided copy mode.
(1) Touch the [1-Sided to 2-Sided] key.
(2) Touch the [OK] key.
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
• To change the color mode, touch the [Color Mode] key.
☞
COPY COLOR MODES
Set the number of copies (number of
sets) with the numeric keys.
2-19
COPIER
(page 2-11)
(page 2-21)
Contents