Polling Memory Transmission Using F-Codes; Scanning A Document Into Amemory Box For F-Code Polling Transmission - Sharp MX-4100N Operation Manual

POLLING MEMORY TRANSMISSION USING
F-CODES
When your machine receives a transmission request from another machine, this function sends a fax stored in an
F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the
F-code configured in your machine or transmission will not take place.
The document to be transmitted must be scanned into an F-code polling memory box.
Transmission request (polling)
using an F-code
Sub-address:
The other
Passcode:
machine
System Settings: F-Code Memory Box
This is used to create memory boxes (polling memory) for F-code polling memory transmission.
A memory box name, sub-address, and passcode are programmed in each box.
SCANNING A DOCUMENT INTO A MEMORY BOX FOR
F-CODE POLLING TRANSMISSION
Follow these steps to scan a document into a memory box (polling memory) for F-code polling transmission.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the
(3) Touch the [Memory Box] key.
☞
SPECIAL MODES
AAAAAAAA
XXXXXXXX
Transmission
(page 7-101)
keys to switch through the screens.
(page 4-69)
The machine
F-code polling memory box
4-115
FACSIMILE
Box name: BBBB
Sub-address: AAAAAAAA
Passcode: XXXXXXXX
Contents