Using The Automatic Document Feeder For Transmission - Sharp MX-4100N Operation Manual

USING THE AUTOMATIC DOCUMENT
FEEDER FOR TRANSMISSION
This section explains how to use the automatic document feeder to send a fax.
Indicator
line
1
When sending a multi-page fax, the automatic document feeder and the document glass cannot both be used to scan
the original pages.
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
2
III III
Sub Address
Sort Address
Freq.
Preview
In addition to specification by one-touch key, a destination can also be specified using a search number. You can also
directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
Press the [BLACK & WHITE START] key.
Scanning begins.
When scanning is completed, the machine sounds a beep.
3
When scanning is completed, "Job stored." will be displayed together with a job control number. This number can be
used to locate the job in the Transaction Report or in the Image Sending Activity Report.
• If a fax is being received when the transmission operation is performed, the transmission will be reserved and transmitted
after fax reception is completed.
• If the memory becomes full while the originals are being scanned, a message will appear and scanning will stop. If Quick
Online transmission is taking place, the originals that were scanned will be transmitted. If Quick Online is not enabled, the
transmission will be canceled.
System Settings (Administrator): Scan Complete Sound Setting
The scan complete sound can be selected.
To cancel scanning...
Press the [STOP] key (
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGH IJKL MNOP QRSTU VWXYZ
"ENTERING DESTINATIONS" (page 4-16).
) to cancel the operation.
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch the one-touch key of the desired
destination.
etc.
4-31
FACSIMILE
Contents