Sharp MX-4100N Operation Manual page 403

Specifying the original scan size (by paper size)
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
Touch the [Original] key.
1
The automatically detected original size appears to the right of the [Original] key.
☞
IMAGE SETTINGS
Fax/Original
Scan Size
Auto 8½x11
2
2-Sided
2-Sided
Tablet
Booklet
Fax/Original
Auto
Manual
Manual
5½x8½ 8½x11R
5½x8½R 8½x13(213x330)
8½x11 8½x14
3
Size Input
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum length that can be scanned is 39-3/8" (1000 mm) (the maximum height is 11-5/8"
(297 mm)).
☞
TRANSMITTABLE ORIGINAL SIZES
• To specify an AB size for the scan size, touch the [AB
scan size.
(page 4-45)
OK
100% Send Size
Auto
Image Orientation
(1) (2)
OK
11x17
AB
Inch
Long Size
(page 4-28)
Touch the [Scan Size] key.
Specify the scan size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
Inch] key to highlight the [AB] side and then specify the
4-48
FACSIMILE
Contents