Sharp MX-4100N Operation Manual page 407

Specifying the send size of the original
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
Touch the [Original] key.
1
☞
IMAGE SETTINGS
Fax/Original
Scan Size
Auto 8½x11
2
2-Sided 2-Sided
Tablet
Booklet
Fax/Original
Auto
Manual
Manual
5½x8½
8½x11R
5½x8½R 8½x13(213x330)
3 8½x11 8½x14
• Depending on the "Scan Size" setting, it may not be possible to select some sizes for the "Send Size". Size keys
that cannot be specified for the "Send Size" are grayed out to prevent selection.
• To specify an AB size for the send size, touch the [AB
send size.
(page 4-45)
OK
100% Send Size
Auto
Image Orientation
(1) (2)
OK
11x17
AB
Inch
Touch the [Send Size] key.
Specify the send size.
(1) Touch the desired send size key.
(2) Touch the [OK] key.
Inch] key to highlight the [AB] side and then specify the
4-52
FACSIMILE
Contents