Sharp MX-4100N Operation Manual page 221

Storing, editing, and deleting text strings
Touch the [Text] key in the stamp selection screen.
1
See steps 1 to 4 of "GENERAL PROCEDURE FOR USING
Stamp
Text
2
Pre-Set
Recall Store/Delete
Stamp
Text
5 10
Store/Delete
No.01 AAA AAA
No.03 CCC CCC
No.05
No.07
No.09
To edit or delete a text string...
• When the key with the text string is touched, the following screen appears.
3
When the [Modify] key is touched, a text entry screen appears. The stored text string appears in the text entry
screen. Edit the text. When you have finished entering the text, touch the [OK] key. The text entry screen will close.
• When the [Delete] key is touched, the stored text is deleted.
• Text settings can also be configured in the Web pages. Click [Application Settings], [Copy settings] and then [Text
Settings (Stamp)] in the Web page menu.
Cancel OK
First Page
Print Color
All Pages
Bk(Black)
Direct Entry
Back
1
3
No.02 BBB BBB
No.04 DDD DDD
No.06
No.08
No.10
A text has been already stored to this
location. Change the text?
Cancel
2-100
STAMP" (page 2-87).
Touch the [Store/Delete] key.
Store a text string, or edit/delete a stored
text string.
• To store a text string, touch a key with no text stored.
A text entry screen will appear. A maximum of 50 characters
can be entered. When you have finished entering the text,
touch the [OK] key. The text entry screen will close.
• To edit or delete a text string, follow the instructions below.
Delete Modify
COPIER
Contents