Paper Trays - Sharp MX-4100N Operation Manual

PAPER TRAYS

The machine is set to automatically select a tray that has the same size of paper as the size of the placed original
(automatic paper tray selection).
If the correct paper size is not selected or you wish to change the paper size, you can select the paper tray manually.
Color Mode
Full Color
Exposure
Auto
Copy Ratio
Original
100%
1
You can also touch the paper size display (A) to open the paper tray settings.
(1)
Paper Select
Paper Tray
1. 8½x11
2
2. 8½x11R
3. 8½x14
4. 11x17
If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper,
that tray will be automatically selected and the copy job will continue.
To return to automatic paper tray selection after selecting a tray manually, press the [CLEAR ALL] key (
System Settings (Administrator): Initial Status Settings (Paper Tray)
Use this setting to change the tray that is selected by default.
Special Modes
2-Sided Copy
Plain
8½x11
Output
1. 8½x11
8½x11R
2.
File
8½x14
3.
4. 11x17
Quick File
Paper Select
Auto Auto
8½x11
Preview
8½x11
Plain
Color Mode
Full Color
Exposure
Auto
Copy Ratio
100%
(2)
OK
Bypass Tray
8½x11
Plain
Plain
Plain
Plain
Plain
Touch the [Paper Select] key.
(A)
Special Modes
2-Sided Copy
Plain
8½x11
8½x11
1.
8½x11R
2.
8½x14
3.
11x17
4.
Quick File
Original Paper Select
Auto Auto
8½x11
8½x11
Plain
Select the tray that you want to use.
(1) Touch the key of the desired tray.
(2) Touch the [OK] key.
You will return to the base screen and the selected tray
will be highlighted.
2-11
Output
File
Preview
).
Contents
COPIER