Sharp MX-4100N Operation Manual page 789

(12) Paper misfeed in the finisher
(13) Paper misfeed in the output area
Open the front cover.
While pressing the lever over
to the left, slide the finisher to
the left until it stops.
Turn roller rotating knob in
the direction of the arrow to
remove the misfed paper.
Make sure that there is no
misfed paper in the machine.
Remove the misfed paper.
(14) Paper misfeed in the saddle stitch
finisher (top)
When a punch module is installed.
8-6
TROUBLESHOOTING
Open the top cover and
remove the misfed paper.
Open the front cover.
Turn the roller knob as
shown in the illustration.
Open the top cover and
remove the misfed paper.
Contents