Sharp MX-4100N Operation Manual page 788

(5) Paper misfeed in the fusing unit
Caution
The fusing unit area is hot. Take care not to burn
yourself. (Do not touch any metal parts.)
Unfused toner may remain on the paper that is
removed. Take care that it does not soil your hands or
clothing.
(6) Paper misfeed in the exit tray unit (right
tray)
(7) Paper misfeed in the reversing unit
Rotate knob and remove the
misfed paper.
If the misfed paper is inside
the fusing area, press down
on the green part to tilt the
fusing unit down toward you.
Rotate knob and remove the
misfed paper.
Remove the misfed paper.
Open the Paper reversing
section cover and remove
the misfed paper.
(8) Paper misfeed in the bypass tray
(9) Paper misfeed in tray 1 to tray 4 (side)
(10) Paper misfeed in the transport area
(11) Paper misfeed in tray 1 to tray 4 (in the
tray)
remove the pieces that remain in the machine.
☞
(9) Paper misfeed in tray 1 to tray 4 (side)
8-5
TROUBLESHOOTING
Remove the misfed paper.
The misfeed may have
occurred inside the machine.
Check carefully and remove
it.
Lower the lever in the
direction of the arrow to
remove the misfed paper.
Before pulling the tray out,
open the right cover and
check if there is a paper
misfeed. If you pull the tray
out without checking, you
may tear misfed paper and
make it more difficult to
Contents