Sharp MX-4100N Operation Manual page 188

Special Modes
Covers/Inserts
Cover Setting
Front
6
Cover
Back
Cover
(1)
Covers/Inserts
Insertion Settings
Insertion
Insertion
Type A Type B
Bypass
Tray 1
Tray
8½x11
8½x11
Plain Plain
(A) (B)
7
If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied
on, tab paper can be inserted.
OK
Cancel OK
Inserts Setting
Insertion
Type A
Insertion
Settings
Insertion
Type B
Tray Settings Page Layout
(2) (5)
OK
Insertion Page
10
Insertion
Total:4
Enter
(3) (C)
2-67
Touch the [Insertion Settings] key.
Specify the pages where inserts A and B
will be inserted.
(1) Touch the [Insertion Type A] key or the
[Insertion Type B] key.
Specify the page where the highlighted insert will be
inserted.
(A) This shows the tray selected for insert type A and the
paper size and type.
(B) This shows the tray selected for insert type B and the
paper size and type.
When the [Insertion Type A] key is highlighted, the insert
sheet insertion settings are applied to [Insertion Type A].
When the [Insertion Type B] key is highlighted, the insert
settings are applied to [Insertion Type B].
(2) Enter the page number where the insert
sheet will be inserted with the numeric
keys.
For more information, see
originals)" (page 2-157) and
originals)" (page 2-157).
The [CLEAR] key ( ) can be pressed to return the
setting of the selected item to the default value. If you
make a mistake, press the [CLEAR] key (
enter the correct number.
(3) Touch the [Enter] key.
(C) This shows the total number of inserts. Up to 100
insert sheets can be inserted. To insert multiple
inserts, touch the [Enter] key after entering each
insertion page number (insertion position) with the
numeric keys.
(4) To insert another insert sheet, repeat steps
(1) to (3).
(5) Touch the [OK] key.
COPIER
"Inserts (copying of 1-sided
"Inserts (copying of 2-sided
) and then
Contents