Reversing White And Black In Acopy (B/W Reverse) - Sharp MX-4100N Operation Manual

REVERSING WHITE AND BLACK IN A COPY (B/W Reverse)
This is used to reverse black and white in a copy to create a negative image. This function can only be used for black
and white copying.
Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce
toner consumption.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the
(3) Touch the [Image Edit] key.
☞
[Image Edit] KEY
Special Modes
Image Edit
3
Photo Repeat
11x17
Full Bleed
Press the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [BLACK & WHITE START] key. Repeat until all pages have been
scanned and then touch the [Read-End] key.
4
When using this function, the [COLOR START] key cannot be used.
To cancel scanning and copying...
Press the [STOP] key (
Originals
keys to switch through the screens.
(page 2-106)
(1) (2)
OK
OK
Multi-Page Mirror
Enlargement Image
B/W
Centering
Reverse
).
B/W Reverse copy
Select B/W Reverse.
(1) Touch the [B/W Reverse] key so that it is
highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-117
COPIER
Contents