Punch Module; Discarding Punch Waste - Sharp MX-4100N Operation Manual

PUNCH MODULE

A punch module can be installed to punch holes in output. To install a punch module, a finisher or saddle stitch finisher
is required.

DISCARDING PUNCH WASTE

Punch waste from punched holes is collected in the punch waste box.
Follow the steps below to discard the punch waste.
Finisher
1
2
3
4
BEFORE USING THE MACHINE
Open the cover.
Grasp the punch waste box handle,
gently pull out the box, and discard the
punch waste.
Discard the punch waste in a plastic bag or other container,
taking care not to let the waste scatter.
Gently push the box back in.
Close the cover.
1-53
Contents