Specifying The Scan Size And Send Size (Enlarge/Reduce) - Sharp MX-4100N Operation Manual

SPECIFYING THE SCAN SIZE AND SEND SIZE
(Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. If, for example, the
scan size were 8-1/2" x 11" (A4) and the send size were 5-1/2" x 8-1/2" (B5), the image would be reduced before
transmission.
• Only standard original sizes can be automatically detected.
☞
STANDARD SIZES
• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan
size.
☞
Specifying the original scan size (by paper size)
☞
Specifying the original scan size (by numerical values)
Scan Internet Fax
Address Book
Original
Direct TX Exposure
Sub Address
Resolution
Address Review Special Modes
File
Quick File
Preview
"Scan Size"
"Send Size" is set to
5-1/2" x 8-1/2" (B5)
8-1/2" x 11" (A4)
(page 4-28)
Fax USB Mem. Scan PC Scan
8½x11
Scan: Auto Send: Auto
Auto
Standard
Auto Reception
Fax Memory:100%
Transmission
The image is reduced
to 5-1/2" x 8-1/2" (B5)
before transmission
(page 4-48)
(page 4-50)
4-47
FACSIMILE
Contents