Saddle Stitch Finisher - Sharp MX-4100N Operation Manual

SADDLE STITCH FINISHER

Finisher unit
1
2
3
4
Take care that a bent staple does not hurt you.
5
Open the front cover.
While pulling the lever, slide the saddle
stitch finisher to the left until it stops.
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
Raise the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
Lower the lever at the front end of the
staple case.
8-12
TROUBLESHOOTING
Contents