Spectra Logic Spectra 10000 Installation Manual page 24

Performance Test 3: Verify Drives
From the Main screen, press the first highlighted drive button to view the drive
1.
statistics. Figure 19 shows the drive information in the first and second Drive Info
screens. The upper left corner of the first Drive Info screen indicates that you are
looking at information for Drive 1. Check that the SCSI bus information is
consistent with the installed drive. You should be familiar with the Spectra 10000
library SCSI bus options and configurations.
Figure 19 Main screen to first and second Drive Info screens.
Touch More in the first Drive Info screen to access the second Drive Info screen
2.
(Figure 19). The information available in this screen is useful in determining the
amount of use on the individual drives and comparing the amount of use each
drive is experiencing (load balancing).
Press Main or Exit in the second Drive Info screen to return to the Main screen.
3.
Repeat Performance Test 3 for all drives.
Note:
For more information on the drive information screens, see the Spectra
10000 User Guide.
24 Spectra 10000 Library AIT Tape Drive Installation Guide
Library Performance Tests