Configuring The Server - Lenovo 5457 Installation And Service Manual

• ServeRAID firmware is stored in ROM on the system board and the RAID adapter (if one is installed).
• SAS/SATA firmware is stored in ROM on the SAS/SATA controller on the system board.

Configuring the server

The following configuration programs come with the server:
• Setup utility
The Setup utility is part of the UEFI firmware. Use it to perform configuration tasks such as changing
interrupt request (IRQ) settings, changing the startup-device sequence, setting the date and time, and
setting passwords. For information about using this program, see
• Boot Manager program
The Boot Manager is part of the UEFI firmware. Use it to override the startup sequence that is set in the
Setup utility and temporarily assign a device to be first in the startup sequence. For more information
about using this program, see
• Lenovo ServerGuide Setup and Installation CD
The ServerGuide program provides software-setup tools and installation tools that are designed for the
server. Use this CD during the installation of the server to configure basic hardware features, such as an
integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating
system. For information about using this CD, see
page 88.
• Integrated management module
Use the integrated management module II (IMM2) for configuration, to update the firmware and sensor
data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network. For information
about using the IMM, see
Integrated Management Module II User's Guide at
docdisplay?lndocid=migr-5086346
• VMware ESXi embedded hypervisor
An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase.
Hypervisor is virtualization software that enables multiple operating systems to run on a host system at the
same time. The USB embedded hypervisor flash device can be installed in USB connectors 3 and 4 on the
system board. For more information about using the embedded hypervisor, see
hypervisor" on page
• Remote presence capability and blue-screen capture
The remote presence and blue-screen capture features are integrated functions of the integrated
management module (IMM2). The remote presence feature provides the following functions:
– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system
state
– Remotely accessing the server, using the keyboard and mouse from a remote client
– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO
and diskette image files as virtual drives that are available for use by the server
– Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
The blue-screen capture feature captures the video display contents before the IMM restarts the server
when the IMM detects an operating-system hang condition. A system administrator can use the blue-
screen capture feature to assist in determining the cause of the hang condition. For more information, see
"Using the remote presence and blue-screen capture features" on page
• Ethernet controller configuration
Lenovo System x3100 M5 Installation and Service Guide
86
"Using the Boot Manager" on page
"Using the Integrated Management Module II (IMM2)" on page 95
.
98.
"Using the Setup utility" on page
94.
"Using the ServerGuide Setup and Installation CD" on
http://www-947.ibm.com/support/entry/portal/
96.
89.
and the
"Using the embedded