Lenovo 5457 Installation And Service Manual page 255

Figure 167. Front USB connector assembly removal for 5U server model with hot-swap power supplies (1)
11. Squeeze the spring clips on the sides of the front USB connector assembly and pull the assembly out of
the back of the housing.
Front USB connector
assembly
Figure 168. Front USB connector assembly removal for 5U server model with hot-swap power supplies (2)
12. Carefully pull the front USB cable out of the opening in the chassis.
13. If you are instructed to return the front USB connector assembly, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Replacing the front USB connector assembly
Use this information to replace the front USB connector assembly
Front USB housing
Front USB housing
Spring clips
.
Chapter 6 Removing and replacing components
243