Lenovo 5457 Installation And Service Manual page 126

The integrated management module II (IMM2) combines service processor functions, video controller, and
remote presence and blue-screen capture features in a single chip. The IMM provides advanced service-
processor control, monitoring, and alerting function. If an environmental condition exceeds a threshold or
if a system component fails, the IMM lights LEDs to help you diagnose the problem, records the error in
the IMM event log, and alerts you to the problem. Optionally, the IMM also provides a virtual presence
capability for remote server management capabilities. The IMM provides remote server management
through the following industry-standard interfaces:
– Intelligent Platform Management Protocol (IPMI) version 2.0
– Simple Network Management Protocol (SNMP) version 3
– Common Information Model (CIM)
– Web browser
For more information about the integrated management module II (IMM2), see
Management Module II (IMM2)" on page
messages" on page 313, and the Integrated Management Module II User's Guide at
947.ibm.com/support/entry/portal/docdisplay?lndocid=migr-5086346
• Dynamic System Analysis
Two editions of Dynamic System Analysis (DSA) are available for diagnosing problems, DSA Portable and
DSA Preboot:
– DSA Portable
DSA Portable collects and analyzes system information to aid in diagnosing server problems. DSA
Portable runs on the server operating system and collects the following information about the server:
– Drive health information
– Event logs for ServeRAID controllers and service processors
– Installed hardware, including PCI and USB information
– Installed applications and hot fixes
– Kernel modules
– Light path diagnostics status
– Microprocessor, input/out hub, and UEFI error logs
– Network interfaces and settings
– RAID controller configuration
– Service processor (integrated management module) status and configuration
– System configuration
– Vital product data, firmware, and UEFI configuration
DSA Portable creates a DSA log, which is a chronologically ordered merge of the system-event log (as
the IPMI event log), the integrated management module (IMM) event log (as the ASM event log), and the
operating-system event logs. You can send the DSA log as a file to Lenovo Support (when requested
by Lenovo Support) or view the information as a text file or HTML file.
Note: Use the latest available version of DSA to make sure that you are using the most recent
configuration data. For documentation and download information for DSA, see
us/en/systems/solutions/
For additional information, see
diagnostic test results" on page
– DSA Preboot
Lenovo System x3100 M5 Installation and Service Guide
114
95, Appendix A "Integrated management module II (IMM2) error
.
"Dynamic System Analysis" on page 125
547.
"Using the Integrated
http://www-
.
http://shop.lenovo.com/
and Appendix C "DSA