Lenovo 5457 Installation And Service Manual page 205

Figure 101. Battery holder and bracket removal from chassis for 5U server model with hot-swap power supplies
6. Remove the battery holder from the bracket by sliding it out of the slot.
Battery holder
Release latch
Figure 102. Battery holder removal from bracket for 5U server model with hot-swap power supplies
7. Remove the latch retainer from the battery holder.
Latch retainer
1
Figure 103. Latch retainer removal from battery holder for 5U server models with hot-swap power supplies
8. If you are instructed to return the battery, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Replacing the battery holder on 5U server model
Use this information to replace the battery holder on the 5U server model.
Bracket
2
Battery holder
.
Chapter 6 Removing and replacing components
193