Lenovo 5457 Installation And Service Manual page 195

Figure 89. Lower bezel removal for 5U server model with hot-swap power supplies
4. If you are instructed to return the lower bezel, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Replacing the lower bezel
This procedure applies only to the 5U server model with hot-swap power supplies.
To install the lower bezel on the 5U server model with hot-swap power supplies, complete the following
steps.
1. Read the safety information in
2. Insert the two bottom tabs on the lower bezel into the corresponding holes in the front of the chassis.
"Safety" on page v and "Installation guidelines" on page
.
Chapter 6 Removing and replacing components
31.
183