Lenovo 5457 Installation And Service Manual page 324

• DIMMs (see "Replacing a memory module" on page
• Microprocessor and heat sink (see
• USB embedded hypervisor flash device (see
on page 221).
8. Reconnect any cables to the system board that you disconnected during removal (see
internal connectors" on page
9. Secure the cables with the retention-clips.
10. Install the hard disk drive fan duct (see
11. Rotate the rear adapter-retention bracket to the closed (locked) position.
12. Stand the server back up in its vertical position.
13. Install and lock the side cover (see
14. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the
server.
Important: Perform the following updates:
• Either update the server with the latest RAID firmware or restore the pre-existing firmware from a
diskette or CD image.
• Update the UUID (see
• Update the DMI/SMBIOS (see
• Reactivate any Features on Demand features.
Lenovo System x3100 M5 Installation and Service Guide
312
"Replacing the microprocessor and heat sink" on page
"Replacing the USB embedded hypervisor flash device"
27).
"Replacing the hard disk drive fan duct" on page
"Replacing the side cover" on page
"Updating the Universal Unique Identifier (UUID)" on page
"Updating the DMI/SMBIOS data" on page
264).
175).
104).
293).
"System-board
216).
102).