Figure 164. Front USB cable removal for 4U server model with non-hot-swap power supplies
8. Unscrew the front USB housing; then, tilt the top of the housing away from the chassis and lift the
housing out of the opening in the chassis.
9. Pull the assembly out of the back of the housing.
1
Figure 165. Front USB connector assembly removal for 4U server model with non-hot-swap power supplies
10. Carefully pull the front USB cable out of the opening in the chassis.
11. If you are instructed to return the front USB connector assembly, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
USB connector cable
2
.
Chapter 6
Removing and replacing components
241