Lenovo ThinkServer TS150 User Manual And Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Server
  5. ThinkServer TS150
  6. User manual and hardware maintenance manual
Lenovo ThinkServer TS150 User Manual And Hardware Maintenance Manual

Lenovo ThinkServer TS150 User Manual And Hardware Maintenance Manual

Hide thumbs Also See for ThinkServer TS150:
Table of Contents

Advertisement

Quick Links

See also: User Guide and Hardware Maintenance Manual , Service
Machine Types:

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkServer TS150

Summary of Contents for Lenovo ThinkServer TS150

  • Page 1 Machine Types:...
  • Page 2 Welcome Read Me First Note: Seventh Edition (October 2018) © Copyright Lenovo 2015, 2018.

  • Page 3: Table Of Contents

    Contents Read this first: safety information ..iii Chapter 1. General information ..1 Chapter 5. Replacing hardware ..39 Chapter 2. Server setup road map . . . 5 Chapter 3.
  • Page 4 Chapter 7. Getting information, help, and service ....105 Appendix C. Restriction of Hazardous Substances (RoHS) Directive ....117 Appendix A.

  • Page 5: Read This First: Safety Information

    Safety Information Safety Information Safety Information Safety Information Safety Information Safety Informa on Safety Information Safety Information 製品をご使用になる前に、Lenovo Web サイトに掲載されているマルチリンガルの Safety Information (安全 上の注意) を読んで理解してください。 제품을 사용하기 전에 Lenovo 웹 사이트의 다국어 Safety Information (안전 정보)를 주의 깊게 읽어보십시오. Safety Information...
  • Page 6 Safety Information Safety Information Safety Information Safety Information Safety Information 在使用产品之前，请务必先阅读和了解 Lenovo Web 站点上的多语言 Safety Information《安全信息》。 Safety Information Safety Information Safety Information Safety Information Safety Information 使用本產品之前，請務必先閱讀及瞭解 Lenovo 網站上多國語言版本的Safety Information（安全資訊）。 Safety Information Safety Information Safety Informa on Lenovo Important: Statement 1...
  • Page 7 Electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. Connect all power cords to a properly wired and grounded electrical outlet. Ensure that all power cord connectors are securely and completely plugged into receptacles.
  • Page 8 • Use of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. DANGER Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following: Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
  • Page 9 Statement 7 CAUTION: If the device has doors, ensure that you remove or secure the doors before moving or lifting the device to protect against personal injury. The doors will not support the weight of the device. Statement 8 CAUTION: Never remove the cover on a power supply or any part that has the following label attached.
  • Page 10 Statement 12 DANGER Overloading a branch circuit is a potential fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed branch current ratings at the installation site. Statement 13 CAUTION: Ensure that the rack is secured properly to avoid tipping when the server unit is extended on the rails.
  • Page 11 Statement 20 CAUTION: A lithium ion battery is provided. To avoid possible explosion, do not burn the battery. Replace the battery only with the Lenovo-approved part. Recycle or discard the battery as instructed by local regulations. Products that are not assessed...
  • Page 12 Safety inspection guide Grounding requirements...

  • Page 13: Chapter 1. General Information

    Chapter 1. General information Introduction Information Where to obtain Lenovo Limited Warranty (LLW) Worldwide Lenovo Support telephone list Most up-to-date information about the server Latest technical information, documentation, device drivers, and other updates Instructions on how to register your server with...
  • Page 14 Date of purchase Server documentation Printed documents Read Me First Electronic documents Safety Information Lenovo Limited Warranty Lenovo License Agreement Documentation Safety, Warranty, and Support Information User Guide and Hardware Maintenance Manual MegaRAID SAS Software User Guide...
  • Page 15 Note:...

  • Page 17: Chapter 2. Server Setup Road Map

    Chapter 2. Server setup road map Server setup procedure Turning on the server Turning off the server CAUTION: The power control button on the device and the power button on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

  • Page 19: Chapter 3. Product Overview

    Chapter 3. Product overview In the box Features and specifications of your server Dimension and weight Electrical input Central Processing Unit (CPU)
  • Page 20 Memory Power supply Note: System Fan Internal drives Expansion slots Input/Output (I/O) features Video subsystem...
  • Page 21 Ethernet connectivity Security features Basic system management features Operating environment Table 1. Operating environment specifications Air temperature (operating) Air temperature (storage) Humidity (operating) Humidity (storage) Altitude Note: Software programs...
  • Page 22 ThinkServer EasyStartup ThinkServer EasyUpdate Firmware Updater Note: Lenovo ThinkServer Diagnostics Lenovo ThinkServer Diagnostics Lenovo ThinkServer Power Planner Lenovo XClarity Essentials OneCLI...
  • Page 23 Component locations Machine type, model, and serial number label Figure 1. Machine type, model, and serial number label Front view of the server...
  • Page 24 Figure 2. Front view of the server Table 2. LED status Status Description Note: Rear view of the server...
  • Page 25 Figure 3. Rear view of the server Power cord connector Serial connector VGA connector (DB-15) DisplayPort connector USB 3.0 connectors (6) Microphone connector...
  • Page 26 Audio line-out connector Audio line-in connector PCIe slots Padlock loop Ethernet connector Ethernet status LED Status Description Security-lock slot Server locks Note:...
  • Page 27 Kensington-style cable lock ® Figure 4. Kensington-style cable lock Padlock...
  • Page 28 ® Figure 5. Padlock Server components Note:...
  • Page 29 Figure 6. Server components...
  • Page 30 Notes: RAID card Figure 7. Lenovo ThinkServer RAID 520i PCIe Adapter Connector Description Connecting cables to the RAID 520i PCIe adapter...
  • Page 31 Figure 8. Connecting the 1-to-4 mini-SAS cable From connectors of the cable To connectors of the storage drives System board components...
  • Page 32 Figure 9. System board components 4-pin power connector CPU socket...
  • Page 33 CPU fan connector Memory slots Thermal sensor connector 10-pin power connector HDD fan connector 4-pin power connectors 9 10 11 12 14 15 SATA connectors Note: Front system fan connector Front panel connector Front USB 3.0 connector 18 19 USB 2.0 connectors Clear CMOS jumper 21 22 23 24 PCIe slots...
  • Page 34 Slot Physical slot size Negotiable link Supported card length bandwidth and height Rear system fan connector Intrusion switch connector Coin-cell battery System board jumper Figure 10. Clear CMOS jumper...
  • Page 35 Jumper cap position Description Attention: Restore BIOS settings to factory default settings or clear a forgotten password Note: Recover BIOS settings from a BIOS update failure Note:...

  • Page 37: Chapter 4. Configuring The Server

    Chapter 4. Configuring the server Using the Setup Utility program Starting the Setup Utility program Setup Utility program interface Notes:...
  • Page 38 Main menu Main Devices menu Devices Devices Menu item Description Serial Port Setup USB Setup ATA Drive Setup Video Setup Audio Setup Network Setup Advanced menu Advanced Advanced Advanced Menu item Description CPU Setup Intel®Manageability Intel SIPP Support CPU CRID Support Chipset CRID support Power menu Power...
  • Page 39 Menu item Description Intelligent Cooling Engine (ICE) Automatic Power On Security menu Security Security Menu item Description Administrator Password Power-On Password Set Administrator Password Set Power-On Password Chassis Intrusion Detection TCG Feature Setup System Event Log Secure Boot Startup menu Startup Startup Menu item...
  • Page 40 Menu item Description Enabled Disable Boot Mode Boot Priority Option Keys Display Enabled Disable Option Keys Display Style Enabled Option Keys Display Legacy Normal Exit menu Exit Exit Exit Menu item Description Save Changes and Exit Discard Changes and Exit Load Optimal Defaults OS Optimized Defaults Enabled...
  • Page 41 Power-On password Note: Password considerations Notes: Setting, changing, or deleting a password Main Security Set Power-On Password Set Administrator Password Note: Selecting a startup device Note: Note:...
  • Page 42 Startup Configuring the TPM function Security TCG Feature Setup TCG Security Features TPM Support Active Exiting the Setup Utility program Exit Updating or recovering the BIOS Updating (flashing) the BIOS Notes:...
  • Page 43 Recovering from a BIOS update failure Note: Using the ThinkServer EasyStartup program...
  • Page 44 Features of the ThinkServer EasyStartup program Starting the ThinkServer EasyStartup program User Guide Note: Next Agree Notes: Compatibility notes User Guide...
  • Page 45 Menu item Description Home Compatibility notes User Guide Hardware list Configure RAID Install operating system About Configuring RAID About RAID RAID 0...
  • Page 46 RAID 1 RAID 5 RAID 10 RAID 50 Note: RAID for your server Notes: Onboard SATA software RAID...
  • Page 47 Advanced SATA/SAS hardware RAID Note: Configuring onboard SATA software RAID Enabling the onboard SATA RAID functionality Note: Devices ➙ ATA Drive Setup Configure SATA as RAID Creating RAID volumes Create RAID Volume Name RAID Level Stripe Size Capacity...
  • Page 48 Exit Deleting RAID volumes Delete RAID Volume Exit Resetting disks to non-RAID Reset Disks to Non-RAID Exit Marking disks as spare Mark Disks as Spare Note: Exit Notes: /etc/mdadm. conf POLICY domain=DOMAIN path=* metadata=imsm action=spare-same-slot...
  • Page 49 /etc/mdadm.conf POLICY domain=DOMAIN path=* metadata=imsm action=spare-same-slot # chkconfig –s mdadmd on # /etc/init.d/mdadmd start Configuring advanced SATA or SAS hardware RAID Programs for configuring SATA/SAS hardware RAID MegaRAID SAS Software User Guide Note: MegaRAID SAS Software User Guide Instructions for configuring SATA/SAS hardware RAID MegaRAID SAS Software User Guide...

  • Page 51: Chapter 5. Replacing Hardware

    Chapter 5. Replacing hardware Note: Purchasing ThinkServer options Note: Getting familiar with important guidelines Precautions...
  • Page 52 Handling static-sensitive devices Attention: System reliability guidelines...
  • Page 53 Attention: Preparing your server and removing the server cover CAUTION: Do not open your server or attempt any repair before reading and understanding “Read this first: safety information” on page iii and “Getting familiar with important guidelines” on page 39. Note:...
  • Page 54 ® Figure 11. Removing the server cover Attention: Removing and installing hardware Notes: Front bezel Removing the front bezel...
  • Page 55 Figure 12. Removing the front bezel Installing the front bezel Figure 13. Installing the front bezel...
  • Page 56 Internal drives Drive bays and supported drives Figure 14. Drive bay locations Drive bay Supported drive...
  • Page 57 Installation rules Note: Drive quantity Installation order Installing a 2.5-inch drive into a 2.5-inch to 3.5-inch drive adapter Figure 15. Installing a 2.5-inch drive into a 3.5-inch to 2.5-inch drive adapter...
  • Page 58 Figure 16. Installing the drive adapter into the drive bracket Optical drive CAUTION: When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are installed, note the following: • Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation.
  • Page 59 Figure 17. Removing the optical drive from the drive bay Installing an optical drive Figure 18. Removing the retainer...
  • Page 60 Figure 19. Installing the retainer Figure 20. Installing the optical drive into the drive bay Figure 21. Connecting cables to the optical drive Cable From the system board To the optical drive...
  • Page 61 Notes: Tape drive Removing a tape drive Figure 22. Removing the tape drive from the drive bay Installing a tape drive...
  • Page 62 Figure 23. Removing the retainer Figure 24. Installing the retainer...
  • Page 63 Figure 25. Installing the tape drive into the drive bay Figure 26. Connecting cables to the tape drive Cable From the system board To the tape drive Note: Note:...
  • Page 64 Storage drive in drive bay 1 Removing a storage drive from drive bay 1 Figure 27. Removing the drive from the drive bay Installing a storage drive into drive bay 1 Note:...
  • Page 65 Figure 28. Installing the drive into the drive bracket Figure 29. Installing the drive into the drive bay Figure 30. Connecting cables to the drive...
  • Page 66 Cable From the system board To the drive Note: Storage drive in drive bay 2 Removing a storage drive from drive bay 2 Figure 31. Removing the drive from the drive bay Installing a storage drive into drive bay 2 Note:...
  • Page 67 Figure 32. Installing the drive into the drive bracket Figure 33. Installing the drive into the drive bay...
  • Page 68 Figure 34. Connecting cables to the drive Cable From the system board To the drive Note: Storage drive in drive bay 3 Removing a storage drive from drive bay 3...
  • Page 69 Figure 35. Removing the drive from the drive bay Figure 36. Removing the drive from the 2.5-inch convertor kit Installing a storage drive into drive bay 3 Note:...
  • Page 70 Figure 37. Installing the drive into a 2.5-inch convertor kit Figure 38. Installing the convertor kit into the drive bay...
  • Page 71 Figure 39. Connecting cables to the drive Cable From the system board To the drive Note: Storage drive in drive bay 4 Removing a storage drive from drive bay 4...
  • Page 72 Figure 40. Removing the convertor kit from the drive bay Figure 41. Removing the drive from the convertor kit Installing a storage drive into drive bay 4 Note:...
  • Page 73 Figure 42. Installing the drive into the drive bracket Figure 43. Installing the drive into the convertor kit...
  • Page 74 Figure 44. Removing the retainer Figure 45. Installing the retainer Figure 46. Installing the convertor kit into the drive bay...
  • Page 75 Figure 47. Connecting cables to the drive and convertor kit Cable From the system board To the drive and convertor kit Notes: Slim optical drive and storage drive in drive bay 5 Removing a slim optical drive and storage drive from drive bay 5...
  • Page 76 Figure 48. Removing the convertor kit from the drive bay Figure 49. Removing the slim optical drive from the convertor kit...
  • Page 77 Figure 50. Removing the drive from the convertor kit Installing a slim optical drive and storage drive into drive bay 5 Note: Figure 51. Installing the slim optical drive into the convertor kit...
  • Page 78 Figure 52. Installing the storage drive into the drive bracket Figure 53. Installing the storage drive into the convertor kit...
  • Page 79 Figure 54. Removing the retainer Figure 55. Installing the retainer Figure 56. Installing the convertor kit into the drive bay...
  • Page 80 Figure 57. Connecting cables to the drives and convertor kit Cable From the system board To the drives and convertor kit Notes:...
  • Page 81 Memory module Note: Memory module installation rules Features Guidelines Installation order...
  • Page 82 Figure 58. Memory module installation order Removing the memory module - x x x - x x - x - x - - x x Figure 59. Removing a memory module Installing the memory module Note:...
  • Page 83 - x x x - x x - x - x - xxx xxxx xxx-xxxxx-x-x-xx-xx xxx xxxx xxx-xxxxx-x-x-xx-xx - x x xxxxxxxxxxxxx-xx xx xx xxxxxxxxxxxxx-xx xx xx xxxx xxxx - x x x - x x - x - x - - x x Figure 60.
  • Page 84 Figure 61. Opening the PCIe card latch Note: Figure 62. Removing the PCIe card Installing a PCIe card...
  • Page 85 Figure 63. Opening the PCIe card latch Note: Figure 64. Installing the PCIe card...
  • Page 86 Lenovo ThinkServer RAID 520i upgrade key Removing the RAID 520i key Notes: Note: Figure 65. Removing the RAID 520i key MegaRAID SAS Software User Guide Installing the RAID 520i key...
  • Page 87 Note: Note: Figure 66. Installing the RAID 520i key MegaRAID SAS Software User Guide Front USB assembly Removing the front USB assembly...
  • Page 88 Figure 67. Removing the front USB assembly Installing the front USB assembly Figure 68. Installing the front USB assembly...
  • Page 89 Thermal sensor Removing the thermal sensor Figure 69. Removing the thermal sensor Installing the thermal sensor...
  • Page 90 Figure 70. Installing the thermal sensor SD module Removing the SD module Figure 71. Removing the SD module...
  • Page 91 Figure 72. Removing an SD card Installing the SD module Figure 73. Installing the SD module bracket Note:...
  • Page 92 Figure 74. Installing an SD card Figure 75. Installing the SD module Front fan assembly Removing the front fan assembly Note:...
  • Page 93 Figure 76. Removing the front fan assembly Installing the front fan assembly...
  • Page 94 Figure 77. Installing the front fan assembly Rear fan assembly Removing the rear fan assembly Note:...
  • Page 95 Figure 78. Removing the rear fan assembly Installing the rear fan assembly Figure 79. Installing the rear fan assembly...
  • Page 96 Intrusion switch Removing the intrusion switch Figure 80. Removing the intrusion switch Installing the intrusion switch...
  • Page 97 ® Figure 81. Installing the intrusion switch Power supply assembly Note: DANGER Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached.
  • Page 98 Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician. Removing the power supply assembly Figure 82.
  • Page 99 Figure 83. Installing the power supply assembly Coin-cell battery...
  • Page 100 DANGER Danger of explosion if battery is incorrectly replaced. When replacing the lithium coin cell battery, use only the same or an equivalent type that is recommended by the manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
  • Page 101 Figure 85. Installing the new coin-cell battery Note: For service technician only: replacing the heat sink and fan assembly Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: The heat sinks and CPUs might be very hot. Turn off the server and wait several minutes to let the server cool before removing the server cover.
  • Page 102 Figure 86. Removing the heat sink and fan assembly Notes:...
  • Page 103 Figure 87. Installing the heat sink fan assembly For service technician only: replacing the CPU Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: The heat sinks and CPUs might be very hot. Turn off the server and wait several minutes to let the server cool before removing the server cover.
  • Page 104 Notes: Figure 88. Removing the CPU...
  • Page 105 Figure 89. Installing the CPU Figure 90. Closing the CPU retainer For service technician only: replacing the system board Attention: CAUTION: Hazardous moving parts. Keep fingers and other body parts away.
  • Page 106 CAUTION: The heat sinks and CPUs might be very hot. Turn off the server and wait several minutes to let the server cool before removing the server cover. Note:...
  • Page 107 Figure 91. Removing the system board Note: Figure 92. Removing the CPU socket cover...
  • Page 108 Notes: Figure 93. Applying the thermal grease to the top of the microprocessor Figure 94. Installing the socket cover Completing the parts replacement...
  • Page 109 ® Figure 95. Installing the server cover Attention:...

  • Page 111: Chapter 6. Troubleshooting And Diagnostics

    Chapter 6. Troubleshooting and diagnostics Troubleshooting procedure Basic troubleshooting tables Notes:...
  • Page 112 Lenovo ThinkServer EasyStartup program problems Symptom Action...
  • Page 113 Optical drive problems Action Symptom...
  • Page 114 Storage drive problems Symptom Action Memory module problems Symptom Action...
  • Page 115 USB device problems Action Symptom...

  • Page 117: Chapter 7. Getting Information, Help, And Service

    Chapter 7. Getting information, help, and service Information resources Using the documentation ThinkServer Web site Lenovo Support Web site Help and service Before you call...
  • Page 118 Calling for service Problem determination Hardware repair Engineering Change management Using other services...
  • Page 119 Warranty Purchasing additional services...

  • Page 121: Appendix A. Regulatory Information

    Appendix A. Regulatory information Export classification notice Electronic emission notices Federal Communications Commission (FCC) Supplier’s Declaration of Conformity (SDoC) - United States Lenovo (United States) Incorporated 7001 Development Drive Morrisville, NC 27560 U.S.A. Email: FCC@lenovo.com Industry Canada Compliance Statement United Kingdom telecommunications safety requirement...
  • Page 122 European Union - Compliance to the Electromagnetic Compatibility Directive Warning: German Class A compliance statement Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse A EU Richtlinie zur Elektromagnetischen Verträglichkeit Deutschland: Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Betriebsmitteln Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln, EMVG vom 20.
  • Page 123 Korea Class A compliance statement Russia Electromagnetic Interference (EMI) Class A statement Taiwan Class A compliance statement Lenovo product service information for Taiwan Japanese electromagnetic compatibility statements Japan VCCI Class A statement Japanese electrical appliance and material safety law statement (for detachable AC power cord)
  • Page 124 JEITA harmonics guideline - Japanese statement for AC power consumption (W) JEITA harmonics guideline - Japanese statement of compliance for products less than or equal to 20A per phase JEITA harmonics guideline - Japanese statement of compliance for products more than 20A Eurasian compliance mark...

  • Page 125: Appendix B. Weee And Recycling Information

    Appendix B. WEEE and recycling information Important WEEE information WEEE information for Hungary Recycling information for Japan Collecting and recycling a disused Lenovo computer or monitor...
  • Page 126 Disposing of Lenovo computer components Disposing of disused lithium batteries from Lenovo computers Recycling information for Brazil Declarações de Reciclagem no Brasil Descarte de um Produto Lenovo Fora de Uso Battery recycling information for Taiwan...
  • Page 127 Battery recycling information for the European Union Notice: Disposing of lithium batteries and battery packs from Lenovo products Disposing of battery packs from Lenovo products...
  • Page 128 Battery recycling information for the United States and Canada Requirement for batteries containing perchlorate...

  • Page 129: Appendix C. Restriction Of Hazardous Substances (Rohs) Directive

    Appendix C. Restriction of Hazardous Substances (RoHS) Directive China RoHS...
  • Page 130 European Union RoHS India RoHS Ukraine RoHS...
  • Page 131 Taiwan BSMI RoHS declaration...

  • Page 133: Appendix D. Addition Statements

    Appendix D. Addition statements Important notes Particulate contamination Attention:...
  • Page 134 Table 3. Limits for particulates and gases Contaminant Limits Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size Environmental conditions for process measurement and control systems: Airborne contaminants German Ordinance for Work gloss statement...

  • Page 135: Appendix E. Notices

    Appendix E. Notices Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560 U.S.A. Attention: Lenovo Director of Licensing...
  • Page 136 Trademarks...

  • Page 137: Appendix F. Abbreviations And Acronyms

    Appendix F. Abbreviations and acronyms Abbreviation or acronym Full term...
  • Page 138 Abbreviation or acronym Full term...

  • Page 139: Index

    Index...

This manual is also suitable for:

70lu70lv70lx70ub70ua70uc ... Show all

Table of Contents