Document Revision History - Carrier TruVu UCXP683T Installation And Startup Manual

Document revision history

Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date Topic
5/10/22 CE and UKCA Compliance
Specifications
Addressing the TV-UCXP683T through
the Service port
Inputs
Input values
Specifications
1/26/22 Specifications
12/3/21 Specifications
To set the IP address
To communicate through the BACnet
Service Port network > Wiring
specifications
Wiring devices to the TV-UCXP683T
Rnet Port
Specifications
9/28/21 What is the TV-UCXP683T?
9/17/21 Wiring devices to the TV-UCXP683T's
Act Net port
What is the TV-UCXP683T?
Specifications
* For internal use only
TruVu™ UCXP683T
Installation and Start-up Guide
Change description
Added UKCA Compliance
Added Caution regarding USB connection
Updated pulse counting note
Updated Pulse to Analog information
Added Aux 24v+ DC
Updated EU Compliance
Removed reference to not change position of power switch
Removed Sitebuilder reference
Changed warning for minimum bend radius
Changed Rnet rate of communication from 115 kbps to 115.2
kbps
Specified "N.O." binary outputs
Corrected wrong graphic of the controller.
Rephrased Act Net addresses to list fixed addresses.
Changed Real time clock specification to "up to 3 days" from "at
least 3 days". Changed EU RoHS compliance code. Rephrased Act
Net addresses to list fixed addresses.
67
Document revision history
Code*
X-PM-AB-R-BH
X-PM-BM-R-
BM
X-TS-RB-R-RB
X-PM-BM-R
X-PM-BM-E
X-PM-BM-O
C-TS-BB-O
X-TS-BB-O-BM
X-TS-BB-O
C-D
X-PM-BM-E
X-PM-BM-O
CARRIER CORPORATION ©2022
All rights reserved