To Get The Tv-Ucxp683T's Serial Number; To Replace The Tv-Ucxp683T's Fuse - Carrier TruVu UCXP683T Installation And Startup Manual

To get the TV-UCXP683T's serial number

If you need the controller's serial number when troubleshooting, the number is on:
•
A Module Status report (Modstat) under Core (or Main) board hardware
•
A QR code, serial number, and MAC address printed on a sticker on the cover
•
A laser-etched number and QR code on the inside circuit board.
See To get a Module Status report (page 59).

To replace the TV-UCXP683T's fuse

The TV-UCXP683T has one fuse.
If the TV-UCXP683T's power
If you suspect a fuse is blown, remove the fuse as described below, and use a multimeter to check it. If the fuse is
blown, try to determine why it blew before you replace it. Check the power wiring polarity of the TV-UCXP683T and
any other devices that share the power supply. Use the same polarity for all of them.
You can purchase the 3 A, fast-acting, 5mm x 20mm glass fuse from Littelfuse, mfr part #0235003.HXP.
TruVu™ UCXP683T
Installation and Start-up Guide
LED is not lit, this could be due to a blown power fuse.
61
Troubleshooting
CARRIER CORPORATION ©2022
All rights reserved