To Communicate Through The Bacnet/Service Port Network - Carrier TruVu UCXP683T Installation And Startup Manual

To communicate through the BACnet/Service port network

To communicate through the BACnet/Service port network
You can connect to the Service port to access your network through the i-Vu® application.
See Addressing the TV-UCXP683T through the Service port (page 9) to set up your connection to the web browser
if you haven't already.
Open a web browser on the computer and launch your i-Vu® application.
1
In the i-Vu® interface, on the System Options tree, select Connections.
2
On the Properties page > Configure tab, select BACnet/IP Service Port Connection from the drop-down list
3
and click Add.
If needed, enter the Service Port Network Number as follows:
4
0 - the TV-UCXP683T will communicate only with the computer or TruVu™ ET Display
○
1 to 65534 - the TV-UCXP683T's network number for network communication
○
65535 - searches for an available network number from 65531 to 65534. If any of these numbers are
○
not available, you will have to assign a network number and enter it.
Click Apply.
5
On the right of the page, in the Networks using selected connection table, click the checkbox next to the
6
network you want to connect to.
Click the Start button. The status changes to Connected.
7
NOTE If an error message appears, make sure the COM port you selected is not in use. For example, PuTTY
may be open and holding the port open.
Click Accept.
8
Open a web browser on the computer and login to your i-Vu® Pro application.
9
10 In the i-Vu® Pro interface, on the System Options tree, select Connections.
11 On the Properties page > Configure tab, Select BACnet/IP Service Port Connection from the drop-down list
and click Add.
12 If needed, enter the Service Port Network Number as follows:
0 - the TV-UCXP683T will communicate only with the computer or TruVu™ ET Display
○
1 to 65534 - the TV-UCXP683T's network number for network communication
○
65535 - searches for an available network number from 65531 to 65534. If any of these numbers are
○
not available, you will have to assign a network number and enter it.
13 Click Apply.
TruVu™ UCXP683T
Installation and Start-up Guide
52
CARRIER CORPORATION ©2022
All rights reserved