Switching To The Previous Channel; Pinning Individual Signals - G&D DP1.4-MUX2-NT Manual

Switching to the previous channel

Use the command <prevmuxchannel>
switch.
SWITCHING TO THE PREVIOUS CHANNEL
<?xml version="1.0" encoding="utf-8"?>
<root>
<prevmuxchannel/>
</root>

Pinning individual signals

The command <pinmux>
to a channel. The permanent switching of these devices is maintained during subse-
quent switching of the KVM channel.
Use the command <unpinmux>
Pinning and unpinnig signals requires the following parameters:
<DlMux4>
<Channel>
<Type>
PIN USB TO CHANNEL 2
<?xml version="1.0" encoding="utf-8"?>
<root>
<pinmux>
<Channel>2</Channel>
<Type>USB</Type>
</pinmux>
</root>
PIN SECOND VIDEO LEVEL TO CURRENT CHANNEL
<?xml version="1.0" encoding="utf-8"?>
<root>
<pinmux>
<Channel>-1</Channel>
<Type plane="1">VIDEO</Type>
</pinmux>
</root>
CANCEL USB PINNING
<?xml version="1.0" encoding="utf-8"?>
<root>
<unpinmux>
<Channel>2</Channel>
<Type>USB</Type>
</unpinmux>
</root>
to switch to the previous channel of the KVM
permanently switches one of the signals
to unpin a signal.
Optional: Device on which the command is executed.
Number (1, 2 or 3) of the pinned channel
To select the currently switched channel, select -1.
Type of the pinned signal: VIDEO,
Controlling the KVM switch via XML
video , audio
USB AUDIO
or
G&D DP1.4-MUX2-NT · 36
or USB