The Kvm Switch; Scope Of Delivery - G&D DP1.4-MUX2-NT Manual

The KVM switch

The KVM switch DP1.4-MUX2-NT lets users operate up to two computers from one
workstation.
NOTE: You can connect computers with up to two video outputs to the MC2 vari-
ant of the KVM switch. The video signals from these computers are displayed on
two separate monitors at the workstation.
The workstation is equipped with a keyboard and mouse as well as a DisplayPort™
monitor. The computers connected to the KVM switch are operated centrally at the
workstation.
Switching to one of the computers connected to the KVM switch can also be carried
out via
 the buttons on the device,
 configured select keys,
 configured step keys,
 a serial device,
 the web application Config Panel
 the switching tool EasyControl,
 XML control,
 or SNMP.
Two USB 3.0 interfaces are available on the front of the device for operating any
USB device. The connected USB devices are available at the active computer.
NOTE: The KVM switch works with full keyboard and mouse emulation on each
channel and guarantees error-free booting of the connected computers at all times.

Scope of delivery

 1 × KVM switch DP1.4-MUX2-NT
 1 × data cable (USB-Service-2)
 1 × power cable
 1 × rack mount set
 1 × EasyStart flyer
 1 × »Safety instructions« flyer
IMPORTANT: Each computer you want to connect requires an individual KVM
cable set.
The KVM switch
G&D DP1.4-MUX2-NT · 4