Initial Configuration Of The Network Settings; Establishing A Connection To The Network Interface - G&D DP1.4-MUX2-NT Manual

Initial configuration of the network
settings
NOTE:
By default, the following settings are preselected:
 IP address of Network interface A:
 IP address of Network interface B: Obtain address via
 global network settings: Obtain settings via
The basic requirement for accessing the web application is the configuration of the
network settings of the device on which the web application is operated.

Establishing a connection to the network interface

How to connect a computer to the network interface of the KVM switch:
1. Use a category 5e (or better) twisted pair cable to connect the network interface
of any computer to the device's Network A interface.
2. Make sure that the IP address of the computer's network interface is part of the
subnet to which the IP address of the device belongs.
NOTE:
Use the IP address 192.168.0.100, for example.
3. Turn on the KVM switch.

Initial configuration of the network settings

192.168.0.1
DHCP
DHCP
G&D DP1.4-MUX2-NT · 18