G&D DP1.4-MUX2-NT Manual page 84

Controlling the KVM switch via XML
6. Enter or edit the following values:
Access:
Port:
Status:
Protocol:
Encryption:
Encryption key:
Initialization
vector:
Authentification:
7. Click on to save your settings and to close the window.
OK
31 · G&D DP1.4-MUX2-NT
Select the protocol (
cation.
Enter the port to process XML communication.
Ports 80, 443 and 27996 are not available for XML control.
Select if access is Enabled
Select if you want to use the
The following types of encryption are supported:
 Unencrypted: Select the option
encryption (default).
 Password encryption:
transmit login passwords with encryption.
 Transport encryption:
transmit the data entirely encrypted.
After enabling an encryption type
(192 bit) in the form of 48 hex digits.
Enabling the encryption type
an initialization vector. Enter the initialization vector (64 bit)
in the form of 16 hex digits.
With TLS encryption
ficate authentification
Remote Control section of the Network tab).
TCP ) or ( UPD ) to process XML communi-
or Disabled .
XML or the
None to transmit data without
Select the option
Select the option
CBC-3DES
CBC-3DES
enabled, you can additionally enable
after uploading a certificate (in the
Extron protocol.
Password: CBC-3DES
CBC-3DES or TLS to
, enter the key
additionally requires
Certi-
to