Switching Via Step Keys - G&D DP1.4-MUX2-NT Manual

Switching between channels

Switching via step keys

Alternative to using select keys to switch between channels connected to the KVM
switch is to use the step keys to switch the channels in ascending or descending order.
IMPORTANT: The active step keys depend on the selected select keys. The following
table lists the step keys depending on the active select keys.
Select keys
1 ... 2
NUM 1 ... NUM 2
A ... B
F1 ... F2
How to use select keys to switch to a particular channel:
1. Press Hotkey+»Forward« Step key
13 · G&D DP1.4-MUX2-NT
»Back« Step key
9
NUM 9
I
F9
or Hotkey+»Back« Step key
»Forward« Step key
0
NUM 0
K
F10
on the console keyboard.