Commands; User Logon And User Logoff - G&D DP1.4-MUX2-NT Manual

Commands

User logon and user logoff

Users can log on with the command
The command <logoffmux>
A successful login requires the following parameters:
<User>
<Password>
If there are several switches in the KVM system, specify additionally on which
switch the logon or logoff is to be executed:
<DlMux4>
<DropMinorErrors/>
Transmitting username and password is not required when logging in.
USER LOGIN
<?xml version="1.0" encoding="utf-8"?>
<root>
<logonmux>
<DlMux4>0x000009CC</DlMux4>
<User>JohnDoe</User>
<Password>secret</Password>
</logonmux>
</root>
NOTE:
Information about optional password encryption is given on page 32.
USER LOGOFF
<?xml version="1.0" encoding="utf-8"?>
<root>
<logoffmux>
<DlMux4>0x000009CC</DlMux4>
</logoffmux>
</root>
<logonmux>
logs users off.
Name of user to log on
Password of user to log on
KVM switch to which the user is to be logged in
Suppress error message if the user is already logged in (logonmux)
or no user is logged in (logoffmux)
Controlling the KVM switch via XML
.
G&D DP1.4-MUX2-NT · 34