Connecting Usb 3.0 Mass Storage Devices - G&D DP1.4-MUX2-NT Manual

Further information

Connecting USB 3.0 mass storage devices

Any USB devices can be connected to the USB 3.0 interfaces on the front panel of
the KVM switch.
If the active channel is switched by the user, the USB device is no longer provided to
the so far active computer. In case the computer writes data on the mass storage
device at that time, this process is aborted.
Before switching the channel, use the Safely remove hardware function of the applied
operating system of the computer to avoid data loss.
25 · G&D DP1.4-MUX2-NT