Configuring The Network Interfaces - G&D DP1.4-MUX2-NT Manual

Configuring the network interfaces

How to configure the settings of a network interface:
IMPORTANT: The operation of both network interfaces within one subnet is not
permitted.
NOTE: The Link Local address space 169.254.0.0.0/16 is reserved for internal com-
munication between devices according to RFC 3330. It is not possible to assign an
IP address of this address space!
1. In the menu, click on
2. Click on the device you want to configure and then click on
3. Click on the tab Network
4. Select the section
Interfaces
5. Enter the following values under
Operating mode
The drop-down list shows the text
been added to a network interface group.
In this case, configure the network interfaces in the »Link aggregation«
section.
IP address:
Netmask
Initial configuration of the network settings
KVM switches .
.
.
Interface A
Select the operating mode of
 Off: Switch off network interface.
 Static: A static IP address is assigned.
 DHCP: Obtain IP address from a DHCP server.
Link aggregation active
Only if the Static operating mode is selected, enter the IP
address of the interface.
Only if the Static operating mode is selected, enter the net-
mask of the network.
Configuration
or :
Interface B
Interface A or Interface B
if the interface has
G&D DP1.4-MUX2-NT · 20
.
: