Machine Plate; Safety Instructions For Particular Operating Phases - Norton Clipper CB 311 Operating Instructions Manual

VERS.2017.11.22

1.2 Machine plate

Important data can be found on the following plate located on the machine:
Machine Model
Serial number

1.3 Safety instructions for particular operating phases

The machine has residual risks that cannot realistically be eliminated by the manufacturer. Guards
cannot prevent access to the blade when cutting, not even if pushers or other safety tools are used.
Machine users must consequently keep in mind that sawing machines are among the most
dangerous of machines.
The machine must always be used with intelligence and good sense, adopting
all the precautions contained in this booklet.
CAUTION !!! RESIDUAL RISKS
In band saws access to the blade is always possible, even if the vertical blade
guard is properly adjusted and clamped in place 5mm above the piece to be cut.
The band blade is protected against accidental contacts during its entire length except for the
section that is strictly necessary to make the cut.
Therefore it is absolutely necessary:

When making cuts keep your hands away from the blade.

Always use a pusher to finish the cut.

Use special tools when pieces to be cut have uneven shapes:
Voltage
Intensity Power Frequency
CB311_MAN_EN
Safety
standard
Type Machine
Year of production
Weight
Symbols
8