Table of Contents
Advertisement
VERS.2017.11.22
CB311_MAN_EN
7 – MOTOR
7.1 Electric motor
Engine of a power of 1.1 kW.
The machine is equipped with a thermal protection which turn off the engine in the event of overload
and this in two different situations:
a) Stop little time after the interlocking
The connection is not made correctly or a phase is not under tension.
To put the switch on the off position (red button) and respectively to check the connection and/or the
voltage phase.
b) Stop during the cut
The engine was overloaded.
Switch ON-OFF is also used as emergency stop key.
7.2 230V Single-phase wiring diagram
32
Advertisement
Table of Contents
