Norton Clipper CB 311 Operating Instructions Manual page 23

VERS.2017.11.22
Make sure the machine is unplugged from the power outlet during transport, repair, maintenance
and inspections.
Before plugging in the plug:

Position the machine on a stable and level surface that can provide optimum support;

Press the feet onto the floor using the pedal provided for this purpose Fig. 16.

Position the bench horizontally, place the wedges and fix the table with the 2 star grips. Fig.
16,17 and 18

Check that the blade is sharp. The blade must have no cracks or fissures, all the teeth must be
the same length, be perfectly sharpened and set (set on track);

Before starting the machine, check that the blade is taut (Fig. 21 and 22);

Make sure that the power outlet has the same phase characteristics as the electric motor and
that the power supply line is equipped with a differential circuit-breaker and a magneto-thermal
protection or a fuse for short-circuits (15 A max). Perform additional grounding if necessary.

Insert the connector to the plug attached to the bench

After these preliminary operations, the electrical connection can be made.
Fig.16
Fig.19
Fig.17
Fig.20
Fig.22
CB311_MAN_EN
Fig.18
Fig.21
23