Operating Requirements; Safety Devices When Working In Enclosed Quarters - Norton Clipper CB 311 Operating Instructions Manual

VERS.2017.11.22

5.5 Operating requirements

Maximum piece dimensions are:

Height31 cm, length 66 cm, useful cutting width 34 cm.
The machine must not be used in the following environment conditions:

In enclosed places;

Temperatures lower than -15° ;

Temperatures higher than +40° (especially for single-phase machines);

Maximum altitude 1000 m (above sea level) :

Power supply voltage 5% lower or greater than rated voltage;

Electric frequency 2% lower or greater than rated frequency;

Corrosive environments (brine or acid) ;

During rainy or excessively damp weather conditions.

5.6 Safety devices when working in enclosed quarters

The machine has a dust outlet opening for working in enclosed quarters: the
user must connect this outlet to an exhaust system (fig.23).
Minimum exhaust capacity: 450 m3/h
Exhaust speed is 20 m/s - Minimum depression = 1500 PA
Turn the exhaust system on before starting the machine.
Wear a facemask to avoid exposure to dust.
It is compulsory to protect your respiratory track
Fig.23
CB311_MAN_EN
27