SAINT-GOBAIN ABRASIVES S.A. 190, BD J.F. KENNEDY L- 4930 BASCHARAGE Declares that this product: CGW 1.30.1 230V Masonry Saws: CGW 1.30.1 230V + Blade CGW 1.20.1 115V 70184629851 Code: 70184629858 70184630481 Is in conformity with the European Machinery Directive 2006/42EC, with the Low Voltage Directive 2006/95/EC and with the Electromagnetic Compatibility Directive 2004/108/EC.
OPERATING INSTRUCTIONS AND SPARE PARTS LIST Basic Safety Instructions Symbols 1.2 Machine plate Safety instructions for particular operating phases Machine description Short description Purpose of use Layout Technical Data Assembly and commissioning Tool assembly Feet and conveyor cart assembly Electrical connections Starting the machine Water cooling system Transport and storing...
1 Basic Safety Instructions The CGW is exclusively designed for the cutting of construction products mainly on construction sites. Uses other than the manufacturer's instructions shall be considered as contravening the regulations. The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne entirely by the user.
1.2 Machine plate Important data can be found on the following plate located on the machine: Maximum blade diameter Year of production Machine Model Machine Code Weight Bore diameter Machine type Serial number Power Safety standard Blade speed 1.3 Safety instructions for particular operating phases Before commencing work •...
2 Machine description Any modification, which could lead to a change in the original characteristics of the machine, may be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with the safety regulations. 2.1 Short description The CGW Masonry saw is designed for durability and high performance for onsite wet and dry cutting operations of a wide range of masonry, refractory and natural stone products.
Page 9
Frame and feet (1) The frame is made of a jig-welded reinforced steel construction to ensure perfect rigidity. 4 removable legs fit into housings welded on frame sides and locked into place with wing screws. Cutting head (2) Spring loaded jig-welded steel console. The motor fixing points and the pivot are machined for perfect fit.
2.4 Technical Data 2,2 kW 230V with thermal overload protection Electric motor 1,5kW 115V with thermal overload protection Electric motor protection IP54 Max. blade diameter 350 mm Bore 25,4 mm Rotation speed of the blade 2800 min Flange diameter 90 mm Cutting depth mm 110 mm (without reversing the material) Sound pressure level...
3 Assembly and commissioning The machine is delivered fully equipped (although without diamond blade). It is ready for operation assembly the diamond blade, the feet and the conveyor cart and after connection to the appropriate power supply. 3.1 Tool assembly Only NORTON blades with a maximum diameter of 350 mm can be used with the CGW.
Page 12
blade, as insufficient water supply may result in premature failure of the diamond blade. The water pump must never run without water. Always make sure that there is enough water in the pan and refill if necessary. In case of frost, empty the water cooling system from its water.
4 Transport and storing 4.1 Securing for transport Before transporting the machine, always remove the blade and empty the water pan. Also remove the conveyor cart, as it can be dangerous while you move the machine. 4.2 Transport procedure Two people are necessary to move the machine. The machine can be moved with or without its feet.
5 Operating the machine 5.1 Site of work 5.1.1 Siting the machine • Remove from the site anything, which might hinder the working procedure! • Make sure the site is sufficiently well lit! • Observe manufacturer's conditions for connecting to power supplies! •...
Page 15
5.2.2 Multiple step cutting Multiple step cutting consists of moving the conveyor cart with the material to be cut back and forward under the rotating blade, • Place the material to be cut on the conveyor cart firmly against the guide-a-cut and the backstop, keeping the hands well away from the blade.
6 Maintenance and servicing To ensure a long-term quality from the cutting with the CGW, please follow the maintenance plan below: Whole machine Visual control (general aspect, watertightness) Clean Flange and blade fixing devices Clean Motor cooling fans Clean Water pump Clean Water pan Clean...
7 Faults: causes and cures Fault-finding procedures Should any fault occur during the use of the machine, turn it off, and isolate it from the electrical supply. Any works dealing with the electrical system or supply of the machine can only be carried out by a qualified electrician.
In the case of a warranty claim, the part must always be returned for evaluation. Spare parts for the motor can be ordered with the manufacturer of the motor or with their dealer, which is often quicker and cheaper. This machine has been manufactured by Saint-Gobain Abrasives S.A. 190, Bd. J.F.Kennedy L- 4930 BASCHARAGE Grand-Duché...
Page 21
Guarantee can be claimed and technical support obtained from your local distributor where machines, spare parts and consumables can be ordered as well: Benelux and France: United Kingdom From Saint-Gobain Abrasives S.A. Saint-Gobain Abrasives Ltd. Free telephone numbers: Doxey Road...
Page 24
SAINT-GOBAIN ABRASIVES S.A. 190, Bd. John F. Kennedy L-4930 BASCHARAGE GRAND-DUCHÉ DE LUXEMBOURG Tel.: ++352 50 401-1 Fax: ++352 50 16 3 3 e-mail: sales.nlx@saint-gobain.com http://www.construction.norton.eu 07.11.2008...