1 Basic Safety Instructions
The TR 230 is exclusively designed for the cutting of tiles with NORTON diamond disks mainly on
construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the regulations.
The manufacturer shall not be held responsible for any resulting damage. Any risk shall be borne
entirely by the user. Observing the operating instructions and compliance with inspection and
servicing requirements shall also be considered as included under use in accordance with the
regulations.
1.1 Symbols
Important warnings and pieces of advice are indicated on the machine using symbols. The following
symbols are used on the Clipper machines:
Read operator's instructions
Hand protection must be worn
Blade rotating direction
1.2 Machine plate
Important data can be found on the following plate located on the machine:
Machine Code
Machine Model
Serial number
Year of production
Blade speed
6
Machine type
Ear protection must be worn
Eye protection shall be worn
Danger: risk of cut
Weight
Blade diameter
Bore diameter
Safety standard
Power