Machine Description; Short Description; Purpose Of Use; Layout - Norton Clipper CB 311 Operating Instructions Manual

VERS.2017.11.22

The machine should only be used by adult and competent persons (a training course is
recommended for those who have never used the machine).

Work procedures are safe when the following instructions are complied with.

This booklet must be delivered to the operator and properly preserved.

Responsibility lies with the owner of the machine. The machine operator is also responsible.

Maintenance must be done with the power off and be performed by qualified personnel.

It is prohibited to remove or tamper with guards!

Always use: protective helmet, earmuffs, goggles or protective visor, heavy duty or safety shoes
and work gloves. Do not work with loose garments.

2 MACHINE DESCRIPTION

Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with
the safety regulations.
2.1

Short description

The band saw is a robust and powerful machine allowing precise cuts in a large variety of light
materials of construction. It can be used on building site but also in industrial environment.
2.2

Purpose of use

The machine is designed for the light concrete cut poroton, gasbeton. It is designed for no
other use.
2.3

Layout

Sliding table (1)
Allows you to place the material to be cut in a stable manner (within the dimensional
limits). It is brought into contact with the blade by manually pushing the table when cutting
after unlocking the safety control.
Therefore, the machine can be used by only one person who takes control of the safety control
system so as to be able to actuate the starting and stopping of the machine.
Blade (2)
It is a blade of dimensions 27x2950mm mm allowing the cut of concrete blocks cellular and
comparable.
CB311_MAN_EN
10