Table of Contents
Advertisement
1B-40
Chapter 1B
AUDIO
Cd CHAngER oPERATIon (SS-V) cont.
Loading a CD
To load a CD into the CD Changer, briefly press the LOAD button
Changer is ready to accept the CD, 'Insert Disc' will be displayed.
The Load Indicator Light
beeps are turned on). Insert the CD with the label surface facing upwards, into the CD
\
slot
until the mechanism pulls the CD inside and it begins to play.
The LOAD function can be cancelled by briefly pressing the EJECT button
the audio system OFF, or it will cancel automatically if no disc has been inserted within
10 seconds after the 'Insert Disc' message is displayed.
Loading all CDs
A function has been included to allow the loading of up to six CDs without having to
repeatedly press the LOAD button.
To start the 'Loading all Discs' function, push and hold the LOAD button
than 2 seconds until a beep sounds (if beeps are turned on) and the display shows
'Loading all Discs'. The display, beeps and Load Indicator Light
when it is time to insert each CD.
This function is cancelled automatically when no CD has been inserted for 10 seconds,
by briefly pressing the EJECT button
Note It is possible to insert and load CDs while the vehicle's ignition key is turned off.
The audio system will turn off after loading the CDs.
Ejecting a CD
To remove the currently selected CD, briefly press the EJECT button
CD is ready for removal from the CD slot
Eject Indicator Light
turned on).
If you wish to eject a CD that is not currently playing, briefly press the EJECT
[
button
followed by the softkey
3 seconds.
The EJECT function can be cancelled by briefly pressing the LOAD button
turning the audio system OFF.
Note If an ejected CD is not removed within 10 seconds, it will be automatically
reloaded to protect it from accidental damage.
Ejecting all CDs
All CDs within the CD Changer can be ejected by pushing and holding the EJECT
[
button
for more than 2 seconds until 'Ejecting all Discs' appears on the display and
a beep sounds (if beeps are enabled). The display, beeps and Eject Indicator Light
will prompt you when it is time to remove each CD.
The 'Ejecting all Discs' function can be cancelled by briefly pressing the LOAD
, or by turning the audio system OFF.
button
Note It is possible to eject one or more CDs when the vehicle's ignition key is off, but
the audio system will switch off after removing the CD(s).
will flash green, and the audio system will beep twice (if
]
[
will flash and the audio system will beep twice (if beeps are
]
Q
that is assigned to the CD you wish to eject within
, or by turning the audio system OFF.
\
, 'Remove Disc' will be displayed. The
. When the
[
, turning
for more
]
will prompt you
[
. When the
or by
]
Advertisement
Table of Contents
