GMC VE UTE Series Owner's Handbook Manual page 272

Table of Contents

Advertisement

9-4
Chapter 9
TOW AND LOAD
SECuRIng CARgo
WARNINg
Do not operate the vehicle with the tailgate
in the open position as cargo may fall from
the load area and the number plate will be
obscured from view.
Do not use the moulded ribs in the rear
load area to secure cargo.
Tie points
Use the six tie points (3 on either side of
load area) shown to secure cargo.
Tie down rails
3
Use tie down rails to secure heavy cargo.
1. To adjust the tie down eyelets, use
a suitable tool to turn the eyelets
anticlockwise to loosen.
2. Slide the tie down eyelet to the
desired position on the tie down rail.
3. Once in the desired position, tighten
by turning clockwise.
4. To remove tie down eyelets, turn
anticlockwise to loosen and slide out
the end of the rail.
Note
Avoid separating the two sections
of the tie down eyelets.
Removed eyelets should be stored
in a safe location.
LoAdIng THE VEHICLE cont.
VEUD9_006
Tie points
VEUD9_009

Advertisement

Table of Contents
loading

Table of Contents