Table of Contents
Advertisement
Storing
The soft tonneau cover, front bar and
bows may be stored behind the front
seats as shown.
fITTIng THE TonnEAu CoVER
WITH HIgH LoAdS
The cover can be adjusted for higher
loads.
1. Remove the two bows if required.
2. Attach the front of the cover. Refer to
Installing the tonneau cover previously
in this chapter.
3. Lay the remainder of the cover roughly
in position.
4. Underneath the cover there is a cord
with attaching clips. Working around
the vehicle, place the clips in the slot
provided, as shown.
Note When removing the cover, the
clips can be removed by pulling them
out and up.
SofT TonnEAu CoVER
Chapter 3
KNOW YOUR VEHICLE
3
cont.
3-27
VEUD3_083
Advertisement
Table of Contents
