GMC VE UTE Series Owner's Handbook Manual page 207

9. Insert the extension bar into the spare
wheel lowering slot. Twist the bar back
and forth to engage into the carrier.
Note Do not lower the tailgate
while the extension bar is in place.
10. Attach the hook end of the jack handle
to the extension bar.
11. To lower the spare wheel wind the jack
handle/extension bar anticlockwise
until it stops.
12. Ensure the spare wheel carrier is
completely wound down and that the
securing cable  has freeplay. Refer
to the illustration at the bottom of
the page.
Note
•
The spare wheel carrier needs
to be fully wound down to ensure
optimum cable length is available
for steps 13 to 15.
• If the spare wheel does not lower,
refer to Spare
troubleshooting further on in this
chapter.
• Remove the jack handle and
extension bar from the vehicle,
once lowering is finished.
CHAngIng A fLAT TyRE cont.
wheel carrier
Chapter 6
EMERGENCIES
6-7
VEUD6_062