GMC VE UTE Series Owner's Handbook Manual page 27

To adjust the Manual overspeed value:
1. Rotate the ENTER switch up or down (▲ or ▼) to highlight
Manual and press the ENTER switch to highlight the current
value.
2. Rotate the ENTER switch up or down to select the desired value
in 5 km increments.
3. Press the ENTER switch to confirm the setting.
To adjust the Manual overspeed value to the current vehicle's
speed:
1. Rotate the ENTER switch up or down (▲ or ▼) to highlight
Manual and press the ENTER switch to highlight the current
value.
2. Press and hold the ENTER switch for more than 3 seconds
to set the value to the nearest 5 km/h step above the current
vehicle's speed.
To select a Preset, rotate the ENTER switch up or down (▲ or ▼)
to highlight the desired preset.
Note While the vehicle's speed is 10 km/h or below, each of the
presets can be altered and values can be stored for future use.
To alter a preset:
1. Rotate the ENTER switch up or down (▲ or ▼) to highlight the
desired preset and press the ENTER switch.
2. Rotate the ENTER switch up or down to select the desired value
in 1 km increments.
3. Press the ENTER switch to confirm the setting.
Note The presets are automatically arranged in ascending order.
Adjusting the setting during an overspeed warning
While the overspeed warning is displayed:
• Rotate the ENTER switch up or down (▲ or ▼),
to adjust the value when in Manual mode.
•
to select a different preset when in Preset mode.
•
• Press and hold the ENTER switch for more than 3 seconds to
change the value to the nearest 5 km/h step above the current
vehicle's speed. If Preset mode was selected, this will change it
to Manual mode.
TRIP ComPuTER cont.
Chapter 1A
DASHBOARD
1A-21