GMC VE UTE Series Owner's Handbook Manual page 118

2-6
Chapter 2
LOCKS
IgnITIon PoSITIonS
WARNINg
Do not switch the engine off while the
vehicle is moving as there will not be
any power assist for brakes or steering.
Never remove the key while the vehicle is
moving, as this will lock the steering.
Lock
When the key is in the LOCK position,
some electrical accessories and the
engine are off.
The key is inserted and removed only
from the LOCK position.
To help guard against theft, the vehicle's engine is automatically disabled shortly after
turning the key to the LOCK position and removing the key from the ignition switch.
In addition, the steering wheel is automatically locked when the key is removed. To
release the steering lock and enable the engine, re-insert the key and turn it towards
the front of the vehicle.
If having trouble turning the key to unlock the steering, turn the steering wheel slightly
to the right or left while turning the key towards the front of the vehicle.
Accessories
When the key is in the ACCESSORIES position, the engine will not run. However
accessories such as the audio and wipers will still operate.
On
When the key is in the ON position, the engine is ready to start (or is already started)
and all electrical systems are active.
Note The warning lamps, which are designed to illuminate at the ignition ON position,
indicate the systems are working. Refer to Warning/reminder indications in chapter 1A.
Do not leave the switch in the ON position for a prolonged period, unless the engine is
running, otherwise the vehicle's battery will discharge.
Start
The key should only be turned to the START position momentarily and then released,
as the engine starts automatically. The key automatically returns to the ON position
when released.
Note If the vehicle stalls after 5 seconds, return the key to the LOCK position. Slowly
rotate the key to the START position. If the security warning lamp flashes, contact your
Holden Dealer.
Refer to Engine starting in chapter 4.
IgnITIon SWITCH