Video Input Panel - Christie CineLife+ CP4415-RGB Installation And Setup Manual

Video Input panel

The Video Input panel, located on the projector side input panel (operator side), has a variety of ports
that can supply alternative video content to the projector.
ID Port
A HDMI input 1 and HDMI input 2
B SDI input 1, SDI input 2, SDI input 3,
and SDI input 4
C DisplayPort (DP1 and DP2)
D Christie Link port
E Software-Defined Video over Ethernet
(SDVoE) port
F USB-C port
CineLife+ 4K-RGB Installation and Setup Guide–CP4415-RGB, CP4420-RGB, CP4425-RGB, CP4435-RGB
020-103244-06 Rev. 1 (06-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Type A connector
HDMI v2.0 protocol supporting EDID 1.3 with HDCP v1.4 and 2.2
support
75 ohm Micro-BNC Connector
Multi-Rate SDI in accordance with SMPTE ST 259 (270Mb/s), ST
292-1 (1.5Gb/s), ST 424 (3.0Gb/s), ST 2081-1 (6Gb/s) and ST
2082-1 (12Gb/s)
Accepts digital video data from DisplayPort 1.2 input with HDCP 1.3
support.
Not used.
Not used.
Connects the projector touch panel.
38