Installing The Expansion Cards - Supermicro SuperStorage SSG-6029P-E1CR24H User Manual

SuperStorage SSG-6029P-E1CR24H/L User's Manual

Installing the Expansion Cards

The system provides three PCI slots for low-profile, half-length expansion cards.
Installing an Expansion Cards
1. Power down the system and remove both covers as described in earlier in this section.
2. In the rear of the chassis, remove the screw securing the PCI slot shield in the PCI slot
that you wish to use.
3. Slide the expansion card bracket into the open PCI slot while plugging the expansion
card into the motherboard.
4. Secure the expansion card bracket into the PCI slot using the screw previously set
aside.
5. Replace the top covers and power up the system.
Figure 3-8. Removing the PCI Slot Shield
53