Table of Contents
Advertisement
SuperStorage Server SSG-6049P-E1CR60H/L/L+ User's Manual
Installing the Expansion Cards
The system provides three PCI slots for Add-On-Modules (AOMs).
Installing an Expansion Cards
1. Power down the system and remove both covers as described in earlier in this section.
2. In the rear of the chassis, remove the screw securing the PCI slot shield in the PCI slot
that you wish to use.
3. Slide the expansion card bracket into the open PCI slot while plugging the expansion
card into the motherboard.
4. Secure the expansion card bracket into the PCI slot using the screw previously set
aside.
5. Replace the top covers and power up the system.
Figure 3-11. Removing the PCI Slot Shield
48
Advertisement
Table of Contents
